SINO Milling Machines Lathe Linear Scale 2 / 3 Axis Digital Readout DRO Optical Sensor

SINO Milling Machines Lathes Linear Scale 2 / 3 Axis Digital Readout DRO Optical Sensor​

The SDS6-3V digital readout uses the most recent 16 bit SCM technology and can replace all types of SDS2 series basic functions as well as any specific necessary functions.

The contron system is simpler and more streamlined, and measurement speed has increased.

There are 40 non-linear adjustment points available per axis.

Improved Functions of SINO Opitical Sensor

EDM functions: The common DRO SDS2 combines two different types of EDM processing functions, and it allows for variable setting.
Axes-accumulative sampling on the lathe The axes Y and Z can be displayed with either their cumulative value or their singleness value (the axes Y and Z correspond to Z and Z0 of the old model SDS2). Users can use the relevant buttons to separate the data from the axes Y during this function in order to see the axes Y's singlenss date. The X, Y, and Z axes' values can be changed in the separation mode, which has all the features a lathe needs from its three axes.

Specifications of SINO SDS6-3V Digital Readout System

Supply Voltage range: AC 80V~260V; 50~60Hz,US Plug available

Power consumption: 15VA

Operating temperature: 0~45 degrees centigrade

Storage temperature: -30~70 degrees centigrade

Readout allowable input signal: TTL/RS422 square wave

Allowable input signal frequency: Less than 5MHz

Display resolution: 5µm/1µm/0.5µm/0.1µm

Min resolution of digital display angle : 0.0001/pulse

Product image /photos:

The rack in the picture is optioned, not standard product.